| Model | NWA5301-NJ |
| Product name | 802.11 b/g/n Wall-Plate Unified Access Point |
| Main Design |
| Wireless frequency | 2.4 GHz |
| Radio | 1 |
| Antenna | Embedded 2x2 |
| RF Specifications |
| Frequency band | 2.4 GHz (11 g/n) | 2.4 GHz (IEEE 802.11 b/g/n); USA (FCC): 2.412 to 2.462 GHz; Europe (ETSI): 2.412 to 2.472 GHz |
| 802.11n premium features | - 2x2 multiple-input multiple-output (MIMO) with two spatial streams
- Maximal Ratio Combining (MRC)
- 20- and 40-MHz channels
- PHY data rates up to 300 Mbps
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- Cyclic Delay diversity (CSD) support
|
Maximum transmit power(Max. total channel)
| US (FCC) 2.4 GHz | 23 dBm, 2 antennas |
| EU (ETSI) 2.4 GHz | 17 dBm, 2 antennas |
| Antenna gain | 5 dBi |
| Support data rate | - 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
- 802.11n: up to 300 Mbps in MCS15 (40 MHz; GI = 400 ns)
|
| Receive sensitivity | 2.4 GHz:
- 802.11b/g, min. up to -95 dBm
- 802.11n/20 MHz, min. up to -93 dBm
- 802.11n/40 MHz, min. up to -92 dBm
|
| LAN |
| Number of 10/100 Mbps LAN ports | Uplink | 1 x 10/100 Mbps POE port (PD) |
| Downlink | 3 x 10/100 Mbps RJ-45 ports (including one PoE PSE) |
| PoE | Yes |
| PoE power draw | 13 W (Include 7 W for PoE PSE) |
| WLAN Security |
| WMM (Wi-Fi certified) | Yes |
| WEP | Yes |
| WPA/WPA2-PSK | Yes |
| WPA2 (Wi-Fi certified) | Yes |
| WPA/WPA2-Enterprise | Yes |
| EAP types | TLS, TTLS, PEAP, FAST, AKA and SIM |
| Number of multiple SSID | 8 |
| IEEE 802.1x | Yes |
| MAC filtering | Yes |
| Layer-2 isolation | Yes, multiple profiles |
| RADIUS authentication | Yes |
| Rogue AP detection | Yes |
| Network |
| VLANs | Yes |
| DHCP client | Yes |
| QoS |
| WMM | Yes |
| WMM power saving | Yes |
| ZyXEL ONE Network |
| ZON Utility | - Discovery of ZyXEL switches, APs and gateways*
- Centralized and batch configurations
- IP configuration
- IP renew
- Device reboot
- Device locating
- Web GUI access
- Firmware upgrade
- Password configuration
- One-click quick association with ZyXEL AP Configurator (ZAC)
|
| Smart Connect | - Discover neighboring devices
- One-click remote management access to the neighboring ZyXEL devices
|
| Management |
| ZAC | - Batch AP configuration
- Batch AP firmware upgrade
- Batch AP profile backup
|
| Standalone AP mode | Yes |
| Managed AP mode** | Yes |
| CLI | Yes |
| Web GUI | Yes |
| SNMP | Yes |
| Certification |
| Radio | ETSI EN 300 328, FCC Part 15C, LP0002, EN 60601-1-2 |
| EMC | EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, FCC Part B, BSMI CNS13438 |
| Safety | EN 60950-1, IEC 60950-1, BSMI CNS14336-1 |
| Physical Specifications |
| Item | Dimensions (WxDxH)(mm/in.) | 85 x 138 x 37.4/3.35 x 5.43 x 1.47 |
| Weight (g/lb.) | 172/0.38 |
| Packing | Dimensions (WxDxH)(mm/in.) | 200 x 141 x 64/7.87 x 5.55 x 2.52 |
| Weight (g/lb.) | 440/0.96 |
| Environmental Specifications |
| Operating temperature | 0°C to 50°C/32°F to 122°F |
| Storage temperature | -30°C to 70°C/-22°F to 158°F |
| Operating humidity | 10% to 90% (non-condensing) |
| MTBF (hr) | 531,785 |